Central warehouse shelving with boxed hardware
Warehouse admin guide

Running thewarehouse

OPS-ADM-045 · For warehouse managers, logistics coordinators and inventory admins — receiving freight, staging rollout kits, and taking equipment back off the trucks for returns and repairs.

Weekly stock check — mandatory

Every warehouse employee is required to complete a full stock check once a week — walk the shelves, scan each unit against the Items register, and correct any variance before the week closes.

Proposed warehouse zone layout

Proposed — not yet in place

A recommendation for organizing the floor by what the stock is for. Each zone keeps two bins — a Returns bin for anything back from the field and not yet assessed, and a Repairs bin for units confirmed repairable — so a part is never mixed back into sellable stock before it is checked.

Zone 1

PRJ

Projects

Staging for project material pulled against a single site or build.

Returns bin Repairs bin

Zone 2

ROL

Rollouts

Rollout kits built and held for multi-site programs.

Returns bin Repairs bin

Zone 3

SVC

Service

Service stock — the everyday break/fix parts trucks replenish from.

Returns bin Repairs bin

Zone 4

EVT

Events

Tradeshow and convention gear — booths, displays and show equipment.

Returns bin Repairs bin

How a unit moves through a zone

  1. 1.A unit comes back from a truck or a job and goes into that zone’s Returns bin — still on the books, not available to pick.
  2. 2.Inspect it against its serial. Clean and working goes straight back to available stock in the same zone.
  3. 3.Repairable goes to the zone’s Repairs bin, with the fault noted on the unit in the Items register.
  4. 4.Once repaired, it returns to available stock in the zone it belongs to.
  5. 5.Beyond repair is recorded as Defective on the unit, with the disposition — RMA vendor credit or scrap / e-waste write-off — so the history shows why it left service.
01

Receive new inventory into the system

When bulk freight or new hardware arrives at the central hub, log it into the app before any of it is distributed.

  • ›Log into your TPSO USA dashboard and open the Inventory tab (visible to TPSO admins and owners).
  • ›Tap Receive stock in the header — the receiving form opens over the dashboard.
  • ›Choose the warehouse the freight landed at (Receive into), then enter the part name and SKU.
  • ›Set the billing classification in the Category field: Project (PRJ), Rollout (ROL), Service Stock (SVC) or Event Gear (EVT). Add the brand, unit cost and minimum threshold.
  • ›Serialized equipment: use the scanner button beside Serial numbers with a tethered USB scanner or your camera, or paste the serials one per line. Every serial becomes its own tracked unit.
  • ›Bulk materials (cable, connectors): still scan or type one serial per unit — each roll or box gets its own line, and the quantity total is the number of lines.
  • ›Add a receiving note (PO number, vendor), then tap Receive stock. Serials already on file are skipped, and the warehouse balance updates immediately.
02

Prepare and allocate rollout kits

Stage a technician’s materials in the app before they arrive for vehicle replenishment.

  • ›Open the Transfers tab and use Load a truck on the Transfer desk.
  • ›Pick the destination truck — the assigned technician is shown beside it.
  • ›Add the units being staged: scan each serial, choose it from Available at warehouses, or paste a list.
  • ›For a rollout kit (KBP Brands, Sonic upgrades), pull from stock received under the Rollout category so it stays accounted for against that program.
  • ›Add a note for the technician, then tap Push transfer to truck.
  • ›The units move to Pending and stay on the warehouse balance until the technician digitally accepts them on their phone. Until then, Transfers → Transfers awaiting acceptance lists the batch and Send back pulls it off the truck.
03

Process defective returns and repairs

When a technician brings back components pulled from a client site, clear them off that truck’s ledger and sort them into returns or repairs.

  • ›Open the Transfers tab and find Defective holding bins — every unit sitting on a truck is listed with its serial and the truck it is on.
  • ›Inspect the hardware the technician hands you against that list.
  • ›Choose the warehouse to return into, then tap Receive on each serial. The unit leaves the truck ledger and lands in that warehouse’s Returns bin.
  • ›Sort each unit by condition: working stock goes back to available in its zone, a repairable unit goes to the zone’s Repairs bin, and a unit beyond repair stays marked Defective.
  • ›Note the fault on the unit in the Items register so whoever repairs it knows what is wrong, then move it to available stock in the zone it belongs to once the repair is done.
  • ›Record the disposition on anything beyond repair — an RMA vendor credit back to the manufacturer, or a scrap / e-waste write-off — so the history shows why the part left service.

Daily habits that keep the numbers true

  • ›Scan, never type, when a barcode is available — a typo in one serial breaks the trail for that unit.
  • ›Accept nothing verbally: a truck transfer only leaves the warehouse books when the technician accepts it in their app.
  • ›Watch the Low stock panel on the dashboard — anything at or below its minimum threshold is flagged there before a tech is sent out short.
  • ›Every movement is stamped with who logged it and when, so the Overview feed is the fastest way to answer “where did this unit go?”